Consumer Grade Adhesive
A premium grade high flash point and easy to apply contact cement designed specially for the do-it-yourself market. A self-curing, air-drying contact cement for excellent bond strength, to be applied by brush, roller or trowel.
- Moisture resistant
- Instant bond
- Heat resistant
- Excellent coverage
- Water resistant
- Permanent bond
- For brush, roller or trowel application
- Easy to spread
Instantly forms a strong bond between dissimilar materials such as plastic, laminates, plywood, hardwood, leather, metal, glass, cork and many more
HOW TO USE IT
For best results, follow this procedure: (1) Stir thoroughly. For best result, apply at temperature above 65ºF (18ºC). (2) Surfaces must be clean, dry and free from loose or foreign matter. (3) Apply to both surfaces and allow twenty to thirty minutes to dry. Avoid excessive drying. (4) Align parts exactly before pressing together; repositioning is impossible once contact is made. (5) Press parts firmly together by hand or mechanical roller. (6) Keep container tightly closed when contact cement is not in use. Avoid storage at temperatures above 100ºF (38ºC) or over six months.
Surface Preparation: Surfaces to be bonded must be clean, dry and free of contaminants such as dirt, oil and grease films.
Caution: Contains petroleum distillates, acetone, toluene/ toluol, M.E.K. (methyl ethyl ketone), heptane and hexane. Flammable vapors may cause flash fires. Before applying, extinguish pilots lights, shut off electrically operated appliances and eliminate other sources of flame or sparks and leave off until areas is clear of vapors. Do not smoke. Close container tightly after each use. Provide adequate ventilation during application and drying cycle.
Danger/Warning: Use only with adequate ventilation. Ventilation must be sufficient to limit exposure below M.S.D.S. limits.
|COLOR:||Natural Clear.||DRYING TIME:||
20 - 30 minutes.
|PRODUCT SIZES:||1 GAL. 1 QUART. 1 PINT. 4 OZ.||MATERIALS:||Plastic. Laminates. Plywood. Hardwood. Leather. Metal. Glass Cork. More.|
|THINNING:||Not normally recommended, but if necessary, use LANCO® Lacquer Thinner LT-102.||TYPE OF ADHESIVE:||Chloroprene rubber.|
|PRECAUTION:||Flammable.||OPEN TIME:||Up to 55 minutes.|
Product View - Custom Info
This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.
Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.
Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.
Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.