Availability: Out of stock

Consumer Grade Concrete Bonder - Blue
A concrete adhesive and fortifier for interior/exterior use. As an adhesive it dries fast to promote a strong bond between old and new concrete, stucco, stone, wood, brick and tile. As a fortifier it provides resiliency.
BASIC USES:   To provide a permanent bond between structurally sound substrates such as wood, concrete, wallboard, acoustical tile and lime plaster.
COLOR:   Blue.
SURFACES:   Wood. Concrete. Wallboard. Acoustical Tile. Lime Plaster.
DRYING TIM:   20 minutes.
CLEAN UP:   Immediately after use with warm soapy water.



*Certain restrictions apply:
Regarding purchases and shipments of doors, moldings, cabinets and machines, please contact us.



Product Description

Consumer Grade Concrete Bonder
A liquid concrete adhesive and fortifier for interior or exterior use, to bond new concrete to old without the laborious scarification process which is usually necessary.  Stronger than most concrete, this powerful bonding agent will retain plasticity and never become brittle.  It withstands humidity and temperatures from –40ºF to 300ºF (-40˚C to 149˚C); can be applied over damp or dry surfaces and is not affected by alkalinity of lime plaster or Portland cement. Available in white or blue.


  • Water resistant
  • Brush or roller application
  • Excellent coverage
  • Safe to use
  • Water cleanup
  • Excellent bond strength
  • Non-flammable
  • Does not contain harmful solvents
  • Fast-drying

To provide a permanent bond between structurally sound substrates such as wood, concrete, wallboard, acoustical tile and lime plaster.

Satisfactory bonding can be obtained by using the following procedure: (1)  Stir contents of container thoroughly before use.  Do not dilute to make volume.  (2)  Surface should be free of dust, sand or foreign matter.  (3)  Apply a uniform coat to the surface by brush, roller or spray gun.  (4)  Before applying the concrete plaster check surface for uniformity of color.  Areas that are irregular in shade indicate an insufficient amount of LANCO® Bonding Agent has been applied.  (5)  Allow at least two hours for LANCO® Bonding Agent to cure before applying concrete plaster.  (6)  If cured 24 hours, apply an additional coat of LANCO® Bonding Agent before applying concrete plaster.  (7)  Always maintain the proper level of water in the concrete plaster mix.  Do not apply if too dry.  (8)  When troweling the concrete plaster, use a circular motion follow through on all strokes.  Never pull the trowel away perpendicular to the surface.

Cleanup: Clean all equipment immediately after use with warm soapy water. Completely flush all spray equipment with this solution.

Caution: Do not take internally. Close container after each use. Keep out of reach of children. Use only with adequate ventilation.

20 minutes.
PRODUCT SIZES:   55 GALS. 5 GALS. 1 GAL. 1 QUART.   SURFACE:   Wood. Concrete. Wallboard. Acoustical Tile. Lime Plaster.  
THINNING:   Water.   TYPE OF EMULSION:   Vinyl acetate homopolymer.  

Additional Information

SKU 16401
Model# CB-610-4
Manufacturer LANCO
Shipping Weight 10.0000

Product View - Custom Info

This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.

Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.

Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.

Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.