Regupol Trueset - Adhesive
Designed for bonding Regupol LV series underlayments and vinyl flooring. The hard-setting feature of Regupol TRUESET Luxury Vinyl Plank and Tile Adhesive resists indentation from static and rolling loads and helps to restrict thermal movement of the finished floor. With its excellent working time, superior bond and low-odor, it is ideal for use in residential and commercial installations. TRUESET can also be used to bond Regupol Sonus underlayment for ceramic tile & stone applications to the sub floor. (see Sonus tile/stone installation instructions for details)
- Easy to trowel
- Excellent workability
- Fast curing
- Strong, yet remains elastic
- Light weight material
- Tenacious bond
- Contains no water
- No mixing or priming required.
HOW TO USE IT:
Condition adhesive, tile or other materials and subfloor at 65°F to 85°F (18°C to 29°C) for 48 hours prior to, during and 48 hours after installation. Read all written installation instructions for installing Regupol LV series underlayment products thoroughly before installation. Select the appropriately notched trowel (see the Trowel Specifications and Spread Rate table) Spread adhesive evenly over the subfloor, keeping the trowel at a 45° angle to the subfloor.
For porous applications: Once troweled the adhesive should be allowed to remain open (flash-off) for approximately 5 to 10 minutes before placement of the flooring material. Once placed, the material should be rolled immediately utilizing a 150-pound three-section roller. Non-porous installations (see chart) require that the adhesive be allowed to dry until the valleys are clear and the trowel ridges are still wet.
Surface Preparation: The subfloor must be structurally sound, flat, smooth, dry and clean. Free of dust, dirt, oil, grease, paint, curing agents, concrete sealers, loosely bonded toppings, loose particles, old adhesive residues, and any other substance or condition that may prevent or reduce adhesion.
Do not work: Do not install over any substrates containing asbestos. • Do not install when the moisture vapor emission rate (MVER) exceeds 5 lbs. per 1,000 sq. ft. per 24 hours, when using the anhydrous calcium chloride test (ASTM F1869). MVER must be diminishing over time. • Do not install when the relative humidity (RH) of the concrete slab exceeds 80% (ASTM F2170). Use only when the substrate temperature is between 65°F and 85°F. The pH reading should be a maximum 10. Building owners should be advised of Regupol America’s flooring installation guidelines for climate control settings (temperature and humidity). These conditions must be monitored and kept constant in order to ensure the overall performance and long-term success of the installation.
Cleanup: Promptly clean any adhesive from the flooring materials surface with water while the adhesive is still fresh/wet. Clean tools with water while the adhesive is still fresh / wet. Use mineral spirits once dried. Use caution with mineral spirits, which may be harmful to some materials.
Note: Regupol TRUESET offers no leveling products and care must be taken in floor preparation to avoid imperfections showing in the flooring.
5 - 30 min.
|PRODUCT SIZES:||4 Gallons.||SUBSTRATES:||Concrete. Wood. Patchind. leveling Compounds. Cement Terrazo. Regupol LV200 - LV270.|
|SPREAD RATE:||Porous 150-200 sq. ft. per gal.
Nonporous 185-245 sq.ft. per gal.
|TROWEL NOTCH:||Porous 1/16" x 1/16" x 1/16" square-notch.
Nonporous 1/32” x 1/16” x 1/32” U-notch
|PRODUCT FORM:||Liquid.||WHERE TO USE:||Interior.|
|COVERAGE:||400 - 650 sq. ft.||SHELF LIFE:||2 years.|
|VOC:||<60 g/l.||WORKING TIME:||15 - 30 min.|
Product View - Custom Info
This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.
Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.
Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.
Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.