BONA DC POLISH REMOVER

$34.47

Availability: In stock







































Deep Clean - Hardwood Floor Care - Professional Use Only
This product is designed for the removal of acrylic based polishes that have been applied onto polyurethane finished wood floors. After application the treated floor can be left as is or re-coated with another acrylic based polish.
ADVANTAGES:   Won’t damage the original finish of the hardwood floor. Works great with the Bona PowerScrubber. Perfect way to remove years of polish build-up and prep for a new, clean coat of Bona DC Polish.
COLOR:   Tan (wet).
SURFACES:   Hardwood.
COVERAGE:   2000 sq. ft./gal.
TO USE:   For removal of acrylic based polishes from polyurethane finished wood floors.

  •   internetsales@ramosdecorandlumber.com

       1.800.897.2667

    *Certain restrictions apply:
    Regarding purchases and shipments of doors, moldings, cabinets and machines, please contact us.

     

     

    Product Description

    Polish Remover - Deep Clean Floor Care
    This product is designed for the removal of acrylic based polishes that have been applied onto polyurethane finished wood floors. After application the treated floor can be left as is or re-coated with another acrylic based polish.

    ADVANTAGES

    • Won’t damage the original finish of the hardwood floor.
    • Works great with the Bona PowerScrubber.
    • Perfect way to remove years of polish build-up and prep for a new, clean coat of Bona DC Polish.

    HOW TO USE IT
    It is recommended use for removal of acrylic based polishes from polyurethane finished wood floors.  Once polish is removed floor may be coated with polish. Once polish is removed floor may not be coated with a urethane finish due to adhesion failure. Can be applied with Bona® Microfiber applicator pad, Bona PowerScrubber™, brown scrubbing pad.

    Using the Bona PowerScrubber: Apply Bona DC Polish Remover™ evenly over a small section of floor (40-60 square feet). • Apply at a rate of 700 – 800 square feet per gallon. • Allow Bona DC Polish Remover™ to dwell on the floor for 5-7 minutes. • Do not allow Bona DC Polish Remover™ to dry on the floor, apply more to areas that are drying prior to the 5-7 minute dwell time. • Using the Bona PowerScrubber® fitted with the standard soft white cleaning brushes and filled with Bona Deep Clean Solution® (mixed per bottle instructions) thoroughly clean the area Bona DC Polish Remover™ was applied to. • Depending on the amount of polish to be removed, it may be necessary to repeat steps 1-5. •  Repeat steps 1-5 on the remainder of the floor, working in small sections until all polish has been removed.

    Without the use of the Bona PowerScrubber: Apply Bona DC Polish Remover™ evenly over a small section of floor (40-60 square feet). • Apply at a rate of 700 – 800 square feet per gallon. • Allow Bona DC Polish Remover™ to dwell on the floor for 5-7 minutes. • Do not allow Bona DC Polish Remover™ to dry on the floor, apply more to areas that are drying prior to the 5-7 minute dwell time. • Using a brown scrubbing pad, driven with a 175 rpm buffer, agitate the area treated with Bona DC Polish Remover. • Clean/mop the treated area using a microfiber cleaning pad, to remove polish residue from the floor. • Depending on the amount of polish to be removed, it may be necessary to repeat steps 1-6 8. Repeat steps 1-6 on the remainder of the floor, working in small sections until all polish has been removed.

    Mixing Instructions: Gently rock bottle back and forth for 30 seconds.

    DO NOT USE:
    Do not use over any floor that has been waxed, oiled or polished. Wax, oil and polish will prevent Bona DC Polish from adhering. Only use a clean Bona Microfiber Applicator pad to apply Bona DC Polish. Use of contaminated applicator pads or string, cotton, or sponge mops will cause a cloudy white appearance. Do not mix with any other products.

    Clean Up: Clean all tools and equipment with warm water.

    Storage temperature: Nonflammable – Bona DC Polish Remover™ should be stored in a climate controlled environment. Keep from freezing. Do not store above 100F.

    Note: Always test in an inconspicuous spot before use.

    COLOR:   Tan (wet).   SUPERFACE:  
    Hardwood.
     
    PRODUCT SIZES:   1 GAL.   TO USE:   For removal of acrylic based polishes from polyurethane finished wood floors.  
    PRODUCT FORM:   Liquid.   PROFESSIONAL/ RESIDENTIAL:   Professional.  
    COVERAGE:   700 0 800  sq. ft. per gallon.   VOC:   <3%  

    Additional Information

    SKU 8324
    Model# WM772018001
    Manufacturer BONA
    Shipping Weight 3.2500

    Product View - Custom Info

    This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.

    Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.

    Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.

    Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.

    Product Tags

    Add your tags

    Use spaces to separate tags. Use single quotes (') for phrases.