Rinse - Recoat System - Hardwood Floor Care
Part of the Bona Recoat System™, Bona Rinse is specifically designed to thoroughly clean and rinse Bona Remover and any contaminants Bona Remover has broken down from the hardwood floor.
- GREENGUARD Indoor Air Quality Certified®.
HOW TO USE IT
Refer to Bona PowerScrubber™ set-up and operational procedures. Do not allow any excess solution to pool or puddle on the wood floor. Wipe up immediately. Can be used for all types of unwaxed residential and commercial polyurethane finished wood floors. Pre-finished, aluminum-oxide floors.
Application: 1. Using the Bona PowerScrubber, clean with the grain of the wood when possible, moving the Bona PowerScrubber up and back in the same path. Only dispense Bona Rinse agent on the forward pass. If Bona Remover has dried or is not being removed completely it will be necessary to dispense Bona Rinse on the backward pass or make a second pass. 2. On subsequent passes overlap the previous pass by 20%. 3. Continue process until all Bona Remover has been rinsed from the floor.
Mixing Instructions: For use with the Bona PowerScrubber™. DO NOT USE UNDILUTTED. ONLY USE TO RINSE BONA REMOVER. IF USED AS A CLEANER BONA RINSE MAY DULL OR DAMAGE THE FLOOR. Dilute Bona Rinse at a 4:1 ratio (4 parts water to 1 part concentrate). When used with the Bona PowerScrubber, add half a gallon of concentrate to the solution tank, then add 2 gallons of water.
Clean Up: Clean all tools and equipment with warm water.
Hardwood. Pre-finished, aluminum-oxide floors.
|PRODUCT SIZES:||1 GAL.||SCENT:||Slight solvent.|