Water Repellent Sealer
Protects exterior pavings from water and humidity. Makes walls and claddings waterrepellent. Ideal for brick veneers and concrete. Protects grout joints. Protects from wear caused by atmospheric agents.
- Gives a long-lasting, renewable protection that allows the material to breathe.
- Does not alter the appearance of the surface.
- Does not yellow despite environmental conditions or ageing.
- High penetration capacity. High coverage.
- Prevents formation of moss and mold.
- Certified as suitable for use on food contact surfaces.
- Prevents efflorescence.
HOW TO USE IT
Do not dilute: Ready to use.
Application: Apply an even, generous coat onto a perfectly clean and dry surface with brush or roller.
On vertical surfaces, the airless spray method is recommended. Apply until no more product can be absorbed. Depending on the absorbency of the substrate, a second coat may be required, after 24 hours.
On low-absorbency natural stone (such as slate) apply one coat. For concrete or more porous natural stone two coats are needed.
On exterior surfaces where oil-repellence is also required, apply a finishing coat of FILAFOB after 24 hours.
Maintenance: diluted solution of FILACLEANER.
Caution: when protecting low porosity natural stone, spot test the product in advance on a small trial surface to check for colour changes Do not apply this product outdoors if rain is in the forecast.
Storage temperature: between 41° F (5° C) and 86° F (30° C). Must be applied to material at temperatures between 50° F (10° C) and 86° F (30° C).
Warranty / Certifications: See Fila Website for Warranty information.
Concrete. Matt Stones and Agglomerates
|PRODUCT SIZE (oz.):||33.92||WHERE TO USE:||Interior. Exterior. Kitchen.|
|SCENT:||Solvent odor.||PROJECT:||Commercial. Residential.|
|COVERAGE 1QT:||Natural stone 20 m2 (215 sq ft)
Concrete 5/10 m2 (54/107 sq ft)
Coverage rates are approximate and refer to a single coat of the product.
|Manufacturer||FILA SURFACE CARE SOLUTIONS|
Product View - Custom Info
This is a custom CMS block. You can use it to display information about shipping, returns, refunds, latest promotions etc. Put any content you want here, like text, HTML or images. There are many useful blocks like this one across the theme. All CMS blocks are editable from the admin panel.
Shipping: Please allow about 5-10 business days for delivery. For delivery to Alaska or Hawaii, please allow 10-15 days for delivery. For delivery to PO Boxes in Alaska, Hawaii, US Territories and APO/FPO addresses, allow three weeks for delivery.
Backorders: All backordered items will be shipped via Standard Delivery service at no additional charge.
Returns Policy: You may return new, unworn or unused products within thirty (30) days of delivery for a full refund of the cost of the goods, or an exchange if preferred.