Aura Waterborne Interior Paint
Aura Interior, with our exclusive Color Lock technology, delivers the ultimate performance for brilliant, rich, and everlasting color.
HOW TO USE IT
Surfaces to be painted must be clean, dry, and free of dirt, dust, grease, oil, soap, wax, scaling paint, water soluble materials and mildew. Remove any peeling or scaling paint, and sand these areas to feather edges smooth with adjacent surfaces. Glossy areas should be dulled. Drywall surfaces must be free of sanding dust. Spot prime with Aura Matte Finish Paint before and after filling nail holes, cracks, and other surface imperfections.
Application: Mixing of Paint: Stir thoroughly before and during use. Use the same brushing techniques as you would for any low-VOC interior coating. Benjamin Moore recommends an extra firm nylon polyester brush for best results. Aura offers excellent flow and leveling. Do not over brush in the attempt to smooth out brush marks. We recommend the Benjamin Moore Aura shed-resistant, 3/8" nap roller cover for best results. Aura dries faster than other acrylic paints, so avoid lap marks by maintaining a wet edge. Roll out vertical sections in 3' to 4' widths. If your edge begins to dry or you see that you missed a spot and the paint is already setting up, allow it to dry completely before touching up that area. This product can also be sprayed; refer to the chart below for spray recommendations.
Clean Up: Wash painting tools in warm soapy water immediately after use. Spray equipment should be given a final rinse with mineral spirits to prevent rusting or follow state/local guidelines on solvent use.
Storage temperature: Store at room temperature. Minimum 40˚ F. Maximum 90˚ F.
Note: Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint. Painted surfaces can be washed after two weeks. High humidity and cool temperatures will result in longer dry, recoat and service times
Limitations: Do not apply when air and surface temperatures are below 50 °F (10 °C). Only Gennex Waterborne Colorants can be added to Aura Paint.
Caution: Use completely or dispose of properly. Dry, empty containers may be recycled in a can recycling program. Local disposal requirements vary; consult your sanitation department or state-designated environmental agency on disposal options.
|COLOR STANDARD||White.||DRYING TIME:||
|PRODUCT SIZES:||5 Gallons. Gallon. Quart.||SURFACE:||New or previously painted wallboard, plaster, masonry and wood; primed or previously painted metal; new or coated acoustic ceilings.|
|COVERAGE:||350 - 400 sq. ft. per gallon.||TOOLS:||Brush Nylon/Polyester. Roller 3/8'. Spray airless pressure 1000 - 2000 psi.|
|SHEEN:||Matte. Eggshell. Satin. Semi-Gloss.||GLOSS:||3 - 5|
|VOC:||0.0||RESIN TYPE:||100% acrylic.|